| Search results - "with" |
Squaring Your Garage Building Layout1216 viewsYour garage building plans were submitted to your local building department and you obtained proper permits and understand your local codes. To square up your building layout set up batter boards with stakes attached as shown. Run string lines from corner to corner using the 8 6 10 method (a2 + b2 = c2) initially and then measure diagonal measurements from a building corner to the opposite corner and adjust your string lines until the building layout is perfectly square.
|
|
Shed Building Front 12' Plan Design3543 viewsShed Building Front Plan Design displays a 12' wall with a 8'x7' door under the gable's 6" overhang. To the far left and right we see the roof's 12" overhang.
|
|
12'x16' Shed Building Plan Cut Elevation Design5365 viewsShed Building Plan cut elevation design displays 8' tall walls with a 8'x7' door and a 36"x36" double hung window.
|
|
Shed Floor Plan to Build a 12'x16' Building5808 viewsShed Floor Plan to Build a 12'x16' Building with a 8'x7' door and a 36"x36" window.
|
|
12'x16' Shed Plan Design with 8' Walls7353 viewsShed Plan Back Cut Design displays 8' tall walls including a 8'x7' overhead door and a 36"x36" double hung window.
|
|
12'x24' Shed Plan Front Design with 8' Walls2167 viewsShed Plan Cut Front Design with 8' Walls displays a 10'x7' garage door opening and a 36"x36" double hung window.
|
|
12'x24' Storage Shed Framing Illustration with Building Material List7587 viewsStorage Shed Building Material List
- Framing for a 12'x24' Storage Shed -
Shed Wall Framing
80 Studs
21 - 4x8 Wall Sheeting
6 - 2x4 Bottom Plates - Treated for Concrete -
12 - 2x4 Top Plates
3 - 2x10x10 - Optional - Solid Header Material
Roof Framing
14 - 4x8 Sheeting
11 - 12' Trusses
2 - Gable Trusses *
4 - 14' 2x6 Fascia
4 - 2x6x8 Gable Fascia *
* Gable Length may Vary Pending on Your Overhang Size - 8 - 12" Gable Overhang Figured
* Add Floor Framing as needed - Framing Materials are Estimated with a Concrete Floor
* Trusses may be hand framed or changed to rafters. If trusses you are building - Scrap Sheeting makes nice gussets.
For rafters - Add two 14' 2x8's Ridge Board, 30 2x6x8 Rafters, and 20 2x4x925/8 for Collar Ties and Bracing.
Framing Nails
Sheeting Nails or Staples
If no Anchor Bolts in the foundation wall add 18 1/2" x 6" cement anchors.
* Verify sizes and materials with your local building inspector and obtain proper building permits.
|
|
Storage Shed Building Plan 12' Back Design2599 viewsStorage Shed Building Plan Back Design with 36"x36" double hung window.
|
|
Storage Shed Building Plan 24' Left Design3646 viewsStorage Building Plan 24' Left Design with 8' tall walls.
|
|
Right 20' Gambrel Shed Plan Design1310 views20' Gambrel Shed Plan Right Design displays 8' tall walls with a 24"x42" double hung window.
|
|
Left Plan Design for the Featured 14'x20' Gambrel Shed1368 views14'x20' Shed Building Left Plan Design displays 8' tall walls topped with a gambrel roof.
|
|
14'x20' Gambrel Shed Building Front Plan Design2633 viewsGambrel Shed Building 14' Front Plan Design displays a 8'x7' garage door opening with a glimpse of the 24"x42" rear double hung window.
|
|
| 225 files on 19 page(s) |
 |
1 | |
|
|
|
|
|
|
|
|
|
|
|
